OzoBOT - Exploration
1. Watch below Video ( 5 minutes)
2. Download the lesson provided (10 minutes)
You will need the two practice sheets provided in the Lesson Download, Markers, and Blank Paper. Follow instructions. Make sure you use the Black Circle in the lesson to be sure Ozo is calibrated. Instructions are below.
On blank paper look at practice codes and try to make your Ozo perform. You will need makers and blank white paper.
4. Look at Ozo capabilities (10 minutes)
Check out this Page to learn more about Ozo possibilities including coding by computer.
5. Program using OzoBlockly (5 minutes or more)
Watch below video. Note that you will need to know if you have an Ozo Evo or Bit (What is the difference between Bit and Evo?). Here is the Web Page Link for programming your Ozo. To learn in more depth, check out some of the tutorials on this Page provided by Ozo.
You will need the two practice sheets provided in the Lesson Download, Markers, and Blank Paper. Follow instructions. Make sure you use the Black Circle in the lesson to be sure Ozo is calibrated. Instructions are below.
- 1. Press and hold the ON/OFF button until Ozobot blinks white (about 2 sec).
- 2. Place Ozobot on the black dot on the track printout.
- 3. When Ozobot blinks green, it means that it has successfully calibrated. Start over if Ozobot blinks red.
On blank paper look at practice codes and try to make your Ozo perform. You will need makers and blank white paper.
4. Look at Ozo capabilities (10 minutes)
Check out this Page to learn more about Ozo possibilities including coding by computer.
5. Program using OzoBlockly (5 minutes or more)
Watch below video. Note that you will need to know if you have an Ozo Evo or Bit (What is the difference between Bit and Evo?). Here is the Web Page Link for programming your Ozo. To learn in more depth, check out some of the tutorials on this Page provided by Ozo.